Publicaciones 2016-2022
2022
María A. Arenas, Ana Conde, Juan J. de Damborenea. Surface Treatments on Ti Alloys and Composites. Reference Module in Materials Science and Materials Engineering. Elsevier ISBN:9780128035818. (2022)
DOI:10.1016/B978-0-12-819726-4.00108-3
2021
A. Conde, J. J. de Damborenea J. M. López-Escobar, C. Pérez-Arnaez. Slow Strain rate technique for studying hydrogen induced cracking in 34CrMo4 high strength steel. International Journal of Hydrogen Energy, 46 (2021) 34970-34982.
DOI:10.1016/j.ijhydene.2021.08.026
R. S. Septimio, M. A. Arenas, A. Conde, I. Garcia, A. Garcia, N. Cheung, J. de Damborenea. Effect of Bi content on microstructure and corrosion behaviour of Zn-8Al-(Bi) alloys. Corrosion Engineering Science and Technology, 1 (2021) 13.
DOI:10.1080/1478422X.2021.1916235
G. A. Longhitano, A. Conde, M. A. Arenas, A. L. Jardini, C. A. de Carvalho Zavaglia, R. M. Filho, J. J. de Damborenea. Corrosion resistance improvement of additive manufactured scaffolds by anodizing. Electrochimica Acta, 366 (2021) 137423.
DOI:10.1016/j.electacta.2020.137423
2020
R.S Septimio, M. A. Arenas Vara, A. Conde, A. García, N. Cheung, J. J. de Damborenea. Galvanic corrosion analysis of a Bi-Zn solder alloy coupled to Ni and Cu substrates. Corrosion Engineering Science and Technology, 55 (2020) 729-738
DOI:10.1080/1478422X.2020.1788772
Auñón, J. Esteban, A. L. Doadrio, M. Boiza‐Sánchez, A. Mediero, D. Eguibar‐Blázquez, J. Cordero‐Ampuero, A. Conde, M. A. Arenas, J. J. de Damborenea, J. J. Aguilera‐Correa.Staphylococcus aureus Prosthetic Joint Infection Is Prevented by a Fluorine‐ and Phosphorus‐Doped Nanostructured Ti–6Al–4V Alloy Loaded with Gentamicin and Vancomycin. Journal of Orthopaedic Research, 38 (2020) 588-597.
2019
L. P. Domínguez-Jaimes, M. A. Arenas, E. I. Cedillo-González, J. J. Ruiz Valdés, J. J. De Damborenea, A. Conde, F. J. Rodríguez-Varela, I. L. Alonso-Lemus and J. M. Hernández-López. Corrosion resistance of anodic layers grown on 304L stainless steel at different anodizing times and stirring speeds. Coatings 9 706 (2019).
G. A. Longhitano, A. Conde, M. A. Arenas, M. A. Larosa, A. L. Jardini, R. M. Filho, C. A. de Carvalho Zavaglia, J. J. de Damborenea. Influence of unit cell and geometry size on scaffolds electrochemical response.Journal of Electroanalytical Chemistry Volume 853, 15 November 2019, 113528
DOI:10.1016/j.jelechem.2019.113528
J-J Aguilera-Correa, A. Auñón, M. Boiza-Sánchez, I. Mahillo-Fernández,A. Mediero, D. Eguibar-Blázquez, A. Conde, M. A. Arenas, J. J. de Damborenea, J. Cordero-Ampuero, J. Esteban. Urine Aluminum Concentration as a Possible Implant Biomarker of Pseudomonas aeruginosa Infection Using a Fluorine- and Phosphorus-Doped Ti-6Al-4V Alloy with Osseointegration Capacity. ACS Omega 2019, 4, 11815−11823
R. S. Septimio, T. A. Costa, C. A. P. Silva, T.A. Vida, J. J. de Damborenea, A. Garcia, N. Cheung.Correlation between unsteady-state solidification thermal parameters and microstructural growth of Zn–8 mass% Al and Zn–8 mass% Al–XBi tribological alloys. Journal of Thermal Analysis and Calorimetry (2019)
DOI:10.1007/s10973-019-08600-2
I. Garcia, S. Guerra, J. J. de Damborenea, A. Conde.Reduction of the Coefficient of Friction of Steel-Steel Tribological Contacts by Novel Graphene-Deep Eutectic Solvents (DESs) Lubricants.Lubricants 7 37 (2019) 1-9
T. Chang, G. Herting, S. Goidanich, J. M. Sánchez Amaya, M.A. Arenas, N. Le Bozec, Y. Jin, C. Leygraf, I. Odnevall Wallinder.The role of Sn on the long-term atmospheric corrosion of binary Cu-Sn bronze alloys in architecture.Corrosion Science, 149, (2019) 54-67.
DOI:10.1016/j.corsci.2019.01.002
M. A. Arenas, I. Padilla, J.L. Robla, A. J. Vázquez, A. López-Delgado.The use of concentrated solar energy for the reduction of CuO in H2. Solar Energy, 180 (2019) 640-647
DOI:10.1016/j.solener.2019.01.064
R. S. Septimio, M. A. Arenas, A. Conde, A. Garcia, N. Cheung, J. J. de Damborenea.Correlation between microstructure and corrosion behavior of Bi-Zn solder alloys.Corrosion Engineering Science and Technology, 54 4 (2019) 1-7
DOI:10.1080/1478422X.2019.1600836
J-J Aguilera-Correa, A. Mediero, F.M. Conesa-Buendía, A. Conde, M. A. Arenas, J. J. de-Damborenea, J. Esteban.Microbiological and Cellular Evaluation of a Fluorine-Phosphorus-Doped Titanium Alloy, a novel Antibacterial and Osteostimulatory Biomaterial with Potential Applications in Orthopedic Surgery.Applied and Environmental Microbiology, 85 (2019) e02271-18
M. Martínez-Perez, A. Conde, M. A. Arenas, I. Mahíllo-Fernandez, J.J. de Damborenea, R. Pérez-Tanoira, C. Pérez-Jorge, J. Esteban.The “Race for the Surface” experimentally studied: In vitro assessment of Staphylococcus spp. adhesion and preosteoblastic cells integration to doped Ti-6Al-4V alloys.Colloids and Surfaces B: Biointerfaces 173 (2019) 876–883
DOI:10.1016/j.colsurfb.2018.10.076
2018
M. A. Arenas-Vara, P. Skeldon, and S. J. García-Vergara.Effect of copper-enriched layers on localized corrosion of aluminium-copper alloys.Rev. Fac. Ing., vol. 27 (48), pp. 7-15, May. 2018.
DOI:10.19053/01211129.v27.n48.2018.8016
A. Durán, Y. Castro, A. Conde, J. J. de Damborenea.Sol-Gel Protective Coatings for Metals Handbook of Sol-Gel Science and Technology.Handbook of Sol-Gel Science and Technology. L. Klein et al. (eds.). Springer International Publishing AG, part of Springer Nature, (2018) 2369-2433.
DOI:10.1007/978-3-319-32101-1_70
M. A. Arenas, J. I. Ahuir-Torres, I. García, H. Carvajal, J. de Damborenea.Tribological behaviour of laser textured Ti6Al4V alloy coated with MoS2 and graphene.Tribology International 128 (2018) 240-247.
DOI:10.1016/j.triboint.2018.07.031
S. Méndez, M. A. Arenas, A. Niklas, R. González, A. Conde, J. Sertucha, J. J. de Damborenea.Effect of Silicon and Graphite Degeneration on High-Temperature Oxidation of Ductile Cast Irons in Open Air.Oxidation of Metals (2018), 1-18.
M. Marín-Sánchez, E. Gracia-Escosa, A. Conde, C. Palacio, I. García.Deposition of Zinc–Cerium Coatings from Deep Eutectic Ionic Liquids. Materials, 11(10) (2018) 2035
J-J Aguilera-Correa, A. L. Doadrio, A. Conde, M. A. Arenas, J. J. de Damborenea, M. Vallet-Regí, J. Esteban. Antibiotic release from F-doped nanotubular oxide layer on TI6AL4V alloy to decrease bacterial viability. Journal of Materials Science: Materials in Medicine (2018) 29:118.
G. A. Longhitano, M. A. Arenas, A. Conde, M. A. Larosa, A. L. Jardini, C. A. de Carvalho Zavaglia, J. J. de Damborenea. Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing. Journal of Alloys and Compounds 765 (2018) 961-968.
DOI: 10.1016/j.jallcom.2018.06.319
J.I. Ahuir-Torres, M.A. Arenas, W. Perrie, J. de Damborenea. Influence of laser parameters in surface texturing of Ti6Al4V and AA2024-T3 alloys. Optics and Lasers in Engineering 103 (2018) 100–109.
DOI:10.1016/j.optlaseng.2017.12.004
2017
Laura Prieto-Borja, Ana Conde, María A. Arenas, Juan J. de Damborenea, Jaime Esteban.Influence of exposure time on the release of bacteria from a biofilm on Ti6Al4V discs suing sonication: An in vitro model.Diagnostic Microbiology and Infectious Disease, 89 (2017) 258-261.
DOI:10.1016/j.diagmicrobio.2017.08.018
J-J. Aguilera-Correa, A. Conde, M. A. Arenas, J. J de-Damborenea, M. Marin, A. Doadrio, Antonio, J. Esteban.Bactericidal activity of Ti-13Nb-13Zr alloy against different species of bacteria related with implant infection.Biomedical Materials, 12 (2017) 1-11.
E. Gracia-Escosa, I. García, J.J. de Damborenea, A.Conde.Friction and wear behaviour of tool steels sliding against high strength boron steel Journal of Materials Research and Technology, 6 (2017) 241-260.
DOI:10.1016/j.jmrt.2017.04.002
Talita A. Vida, Ana Conde, Emmanuelle S. Freitas, Maria A. Arenas, Noé Cheung, Crystopher Brito, Juan de Damborenea, Amauri Garcia.Directionally solidified dilute Zn-Mg alloys: correlation between microstructure and corrosion properties Journal of Alloys and Compounds, 723 (2017) 536-547.
DOI:10.1016/j.jallcom.2017.06.228
J.I. Ahuir-Torres, M.A. Arenas, W. Perrie, G. Dearden, J. de Damborenea.Surface texturing of aluminium alloy AA2024-T3 by picosecond laser: Effect on wettability and corrosion properties. Surface & Coatings Technology 321 (2017) 279–291.
DOI:10.1016/j.surfcoat.2017.04.056
M. Martínez-Pérez, C. Pérez-Jorge, D. Lozano, S. Portal, R. Pérez-Tanoira, A. Conde, M. A. Arenas, J. M. Hernández-López, J. J. de Damborenea, E. Gómez-Barrena, P. Esbrit, J. Esteban.Evaluation of bacterial adherence of clinical isolates of Staphylococcus sp. using a competitive model: An in vitro approach to the “race for the surface” theory.Bone & Joint Research 6 (2107) 315-322.
DOI:10.1302/2046-3758.65.BJR-2016-0226.R2
J.J. de Damborenea, M. A. Arenas, Maria Aparecida Larosa, André Luiz Jardini, Cecília Amélia de Carvalho Zavaglia, A.Conde. Corrosion of Ti6Al4V pins produced by direct metal laser sintering. Applied Surface Science, 393 (2017) 340-347.
DOI: 10.1016/j.apsusc.2016.10.031
C. Pérez-Jorge, M.A. Arenas, A. Conde , J.M. Hernández-Lopez , J. J deDamborenea, Steve Fisher, A.M Agostinho Hunt, Jaime Esteban, and Garth James. Bacterial and fungal biofilm formation on anodized titanium alloys with fluorine.span> Journal of Materials Science: Materials in Medicine, 28 (2017) 1-7
DOI: 10.1007/s10856-016-5811-5
F. Bertelli, Emmanuelle S Freitas. N. Cheung, M. A. Arenas, A. Conde, J. de Damborenea, A. Garcia. Microstructure, tensile properties and wear resistance correlations on directionally solidified Al-Sn-(Cu; Si) alloys. Journal of Alloys and Compounds, 695 (2017) 3621-3631.
DOI: 10.1016/j.jallcom.2016.11.399
2016
A. Conde, J. J de-Damborenea.Degradation of vitreous enamel coatings, In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford:Elsevier, (2016) 1-181.
DOI:10.1016/B978-0-12-803581-8.09808-8
E. Matykina , I. Garcia, R. Arrabal, M. Mohedano, B. Mingo, J. Sancho, M.C. Merino, A. Pardo. Role of PEO coatings in long-term biodegradation of a Mg alloy. Applied Surface Science 389 (2016) 810–823.
DOI:10.1016/j.apsusc.2016.08.005
A. Conde, J. J. de Damborenea.Degradation of Vitreous Enamel Coatings in Reference Module in Materials Science and Materials Engineering. Saleem Hashmi (editor-in-chief), Elsevier, Oxford . (2016) 1-18.
DOI: 10.1016/B978-0-12-803581-8.09808-8
I. Garcia, E. Gracia-Escosa, M. Bayod, A. Conde, A. Arenas, J. Damborenea, A. Romero, G. P. Rodriguez.Sustainable production of Titanium foams for biomedical applications by Concentrated Solar Energy sintering. Materials Letters 185 (2016) 420-423.
DOI: 10.1016/j.matlet.2016.09.037
M. Marín-Sánchez, A. Conde, M. García-Rubio, A. Lavía, I. García. Durability of titanium adhesive bonds with surface pretreatments based on alkaline anodization. International Journal of Adhesion and Adhesives, 70 (2016) 225-233.
DOI: 10.1016/j.ijadhadh.2016.07.001
Talita A. Vida, Emmanuelle S. Freitas, Crystopher Brito, Noé Cheung, Maria A. Arenas, Ana Conde, Juan de Damborenea, Amauri Garcia Thermal analysis and microstructural development in directionally solidified Zn-rich Zn-Mg alloys. Metallurgical and Materials Transactions A, 47A (2016) 3052-3064.
DOI: 10.1007/s11661-016-3494-7
S.Khorsand K. Raeissi, F. Ashrafizadeh, M.A. Arenas, A. Conde. Corrosion behaviour of super-hydrophobic electrodeposited nickel–cobalt alloy films. Applied Surface Science 364 (2016) 349–357.
DOI:/10.1016/j.apsusc.2015.12.122
2015
M. Ruiz-Andres, A. Conde, J. de Damborenea, I. Garcia. Influence of sliding direction changes, contact frequency and Bauschinger Effect on the wear of Dual Phase steels. Tribology International 92 (2015) 485-492
DOI: 10.1016/j.triboint.2015.07.033
M. Ruiz-Andres, A. Conde, J. de Damborenea, I. Garcia. Wear Behavior of Aluminum Alloys at Slow Sliding Speeds. Tribology Transactions 58 (2015) 955–962
DOI: 10.1080/10402004.2015.1027432
M. Ruiz-Andres, A. Conde, J. de Damborenea, I. Garcia. Microstructural and micromechanical effects of cold roll-forming on high strength dual phase steels. Materials Research 18 (2015) 843-852
A. Doadrio, A.Conde, M. A. Arenas, J.M Hernández-López, J. de Damborenea, J. Esteban, C. Pérez-Jorge, M. Vallet. Use of anodized titanium alloy as drug carrier: ibuprofen as model of drug releasing. International Journal of Pharmaceutics , 492 (2015)207-212
DOI:10.1016/j.ijpharm.2015.07.046
J. J. de Damborenea, M.A. Larosa, M. A. Arenas, J. M. Hernández-López, A. L. Jardini , M. C. F. Ierardi, C. A.C. Zavaglia , R. M. Filho, A. Conde. Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications. Materials & Design 83 (2015) 6–13.
DOI:10.1016/j.matdes.2015.05.078
I. Golvano, I.García, A. Conde, W. Tato, A. Aginagalde. Influence of fluoride content and pH on corrosion and tribocorrosion behaviour of Ti13Nb13Zr alloy in oral environment. Journal of the Mechanical Behavior of Biomedical Materials, 49 (2015) 186-196
DOI:10.1016/j.jmbbm.2015.05.008
E.Gracia-Escosa, I. García, J.C. Sánchez-López, M.D. Abad, A. Mariscal, M.A. Arenas, J. de Damborenea, A. Conde. Tribocorrosion behaviour of TiBxCy/a-C nanocomposite coatings in strong oxidant disinfectant solutions. Surface and Coatings Technology, 263 (2015) 78-85.
DOI:10.1016/j.surfcoat.2014.12.047
D. Lozano, J. M. Hernández-López, P. Esbrit, M.A. Arenas, E. Gómez-Barrena, J. de Damborenea, J. Esteban, C. Pérez-Jorge, R. Pérez-Tanoira, A. Conde. Influence of the nanostructure of F-doped TiO2 films on osteoblast growth and function. Journal of Biomedical Materials Research A, 130A (2015) 1985-1990.
J. M. Hernández-López, A. Conde, J. de Damborenea, M. A. Arenas. Correlation of the nanostructure of the anodic TiO2 layers fabricated on Ti13Nb13Zr with the electrochemical impedance response. Corrosion Science, 94 (2015) 61-69.
DOI: 10.1016/j.corsci.2015.041
M. Ruíz-Andrés, A. Conde, J.J. de Damborenea, I. García. Friction and wear behaviour of dual phase steels in discontinuous sliding contact conditions as a function of sliding speed and contact frequency. Tribology International 90 (2015) 32-42.
DOI:10.1016/j.triboint.2015.03.038
S. Khorsand, K. Raeissi, F. Ashrafizadeh, M.A. Arenas. Super-hydrophobic nickel-cobalt alloy coating with micro-nano flower-like structure. Chemical Engineering Journal, vol.273 (2015) 638-646.
A. Romero, I. García, M.A. Arenas, V. López, A. Vázquez. Ti6Al4V titanium alloy welded using concentrated solar Energy. Journal of Materials Processing Technology 223 (2015) 284–291.
DOI:10.1016/j.jmatprotec.2015.04.015
2014
I. Masmitjà, J. del Rio, J. J de Damborenea, A. Conde. Underwater potentiostat for real-time electrochemical corrosion measurements. Sensor Systems for a Changing Ocean (SSCO), IEEE (2014) 1-4
J.M. Hernández-López, A. Němcová, X.L. Zhong,H. Liu, M.A. Arenas, S.J. Haigh, M.G. Burke, P. Skeldon, G.E. Thompson. Formation of barrier-type anodic films on ZE41 magnesium alloy in a fluoride/glycerol electrolyte.Electrochimica Acta, 138 (2014) 124–131.
J. Mochón, I. Ruiz-Bustinza, A. Vázquez, D. Fernández, J. M. Ayala, M. F. Barbés, L. F. Verdeja. Transformations in the iron-manganese-oxygen-carbon system resulted from treatment of solar energy with high concentration. Steel Research International85 (10), (2014) 1469-1476.
I. Padilla, A. López-Delgado, S. López-Andrés, M. Álvarez, R. Galindo, A.J. Vazquez-Vaamonde. The application of thermal solar energy to high temperature processes: Case study of the synthesis of alumina from boehmita. The Scientific World Journal, Volume 2014 (2014), Article ID 825745, 7 pages.
M.A. Arenas, A. Conde, J.J. de Damborenea. Effect of protein addition in tribocorrosion behaviour of AISI 316L. Corrosion Engineering, Science and Technology, 49 (2014) 656-660.
M. Marín, P. Ocón, A. Conde, I. García. Electrodeposition of Zn-Mn coatings from 1-Ethyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Ionic Liquid. Surface and Coatings Technology, 258 (2014) 871-877.
DOI:10.1016/j.surfcoat.2014.07.064
J. I. Ahuir-Torres, J. M. Hernández-López, M. A Arenas, A. Conde, J. de Damborenea. Synthesis of TiO2 nanopore arrays by pulsed laser treatment and anodic oxidation. Surface and Coatings Technology, 259 (2014) 408-414.
DOI:10.1016/j.surfcoat.2014.10.058
M. A. Arenas, A. Niklas, A. Conde, S. Méndez, J. Sertucha, J. de Damborenea. Comportamiento frente a la corrosión de fundiciones con grafito laminar y esferoidal parcialmente modificadas con silicio. Revista de Metalurgia, 50 (4) (2014) 1-9.
S. Ferreira, A. Conde, M. A. Arenas, L. Rocha, A. Velhinho. Anodization mechanism on Al/SiCp composites obtained by powder metallurgy. Materials, 7 (2014) 8151-8167.
J.M. Hernández-López, A. Conde, J.J. de Damborenea, M.A. Arenas. Conical TiO2 nantoubes with tunable morphologies. RSC Advances, 4 (2014) 62576-62585.
J. J. de Damborenea, A. Conde, M. Arenas. Corrosion inhibition with rare earth metal compounds in aqueous solutions, in Rare Earth- based Corrosion. Edit. Maria Forsyth and Bruce Hinton. Woodhead Publishing Series in Metals and Surface Engineering. Reino Unido, Elsevier No. 61 (2014) 338.
Perez-Jorge C, Perez-Tanoira R, Lozano D Conde A, Arenas MA, Hernandez-Lopez JM, De Damborenea JJ, Gomez-Barrena E, Esbrit P, Esteban J. A competitive assay for bacterial and cellular adherence to biomaterials: An in vitro approach to the “race for the surface” theory. Bone Joint Journal Br (Orthopaedic Proceedings), 96B (Sup 11) (2014) 33.
2013
M.A. Arenas, C. Pérez-Jorge, A. Conde, E. Matykina, J.M. Hernández-Lopez, R. Pérez-Tanoira, J. de Damborenea, E. Gómez-Barrena, J. Esteban. Doped TiO2 anodic layers of enhanced antibacterial properties. Colloids and Surfaces B: Biointerfaces, 105 (2013) 106-112.
M.A. Arenas, A. Conde, J. de Damborenea. The role of mechanically activated area on tribocorrosion of CoCrMo. Metallurgical and Materials Transactions A, 44A (2013) 4382-4390.
I. Ruiz-Bustinza, I. Cañadas, J. Rodríguez, J. Mochón, L. F. Verdeja, F. Garcia-Carcedo, A. J. Vázquez. Magnetite production from steel wastes with concentrated solar energy. Steel Research International 84 (3) (2013) 207-217.
D. Sola , A. Conde, I., E. Gracia-Escosa, J. J. de Damborenea, J.I. Peña. Microstructural and wear behavior characterization of porous layers produced by pulsed laser irradiation in glass-ceramics substrates. Materials, 6 (2013) 3963-3977.
A. Romero, I. García, M.A. Arenas, V. López, A. Vázquez. High Melting Point Metals Welding by Concentrated solar energy. Solar Energy 95 (2013) 131-143.
J. Cervantes, A. Barba, M.A. Hernández, J. Salas, J.L. Espinoza, C. Dénova, G. Torres-Villaseñor, A. Conde, A. Covelo y R. Valdez. Obtención y caracterización de recubrimientos Zn-Al-Cu por inmersión en caliente sobre aceros de bajo carbono. Revista de Metalurgia, 49 (5) (2013) 351-359.
2012
C Pérez-Jorge, A Conde, MA Arenas, R Pérez-Tanoira, E Matykina, J.J de Damborenea, E Gómez-Barrena, J Esteban. In vitro assessment of Staphylococcus epidermidis and Staphylococcus aureus adhesion and viability on TiO2 nanotubes on Ti-6Al-4V alloy. Journal of Biomedical Materials Applications, A, 100 (2012) 1696-1705.
M. Toledano, P. Torres, M. A. Arenas, A. Conde. Influencia del espesor de las capas anódicas en la vida a fatiga. Revista Latinoamericana de Metalurgia y Materiales, 32 (2012) 121- 128.
C. Muñoz-García, A. Conde,I. García,G. G. Fuentes, E. Almandoz,J. A.García,R.J.Rodríguez, Y. Qin, Y. Friction, nanowear and corrosion properties of electroplated nickel surfaces after dual implantation of Cr + and N 2 + ions. Influence of the implantation energy of the N 2 + ions. Surface and Coatings Technology, 210 (2012) 46-53
C. Perez-Jorge, R. Perez-Tanoira, M.A. Arenas, E. Matykina, A. Conde and E. Gomez-Barrena. Staphylococcus Sp. Adhesion to Barrier Layer-Modified Titanium Alloy. Journal Bone Joint Surgery Br, 94B (2012) 144.
2011
E. Matykina, J. M. Hernandez-López, A. Conde, C. Domingo, J.J. de Damborenea, M. A. Arenas. Morphologies of Nanostructured TiO2 Doped with F on Ti-6Al-4V Alloy. Electrochimica Acta 56 (2011) 2221-2229.
M. A. Arenas, E. Frutos, L. Saldaña, A. Conde, J. L González-Carrasco, L. Labajos-Broncano, M. L. González-Martín, N. Vilaboa. Corrosion behaviour and biocompatibility of a novel Ni- free intermetallic coatings grown on austenitic steel by hot dipping in an Al-12.6%Si alloy. Journal of Materials Science: Materials in Medicine, 22 (2011) 1005-114.
E. Matykina, I. Garcia, J. J. de Damborenea, M. A. Arenas. Comparative determination of TiO2 surface energies for adhesive bonding application. International Journal of Adhesion and Adhesives, 31, (2011) 832-839.
S. Goidanich, J. Brunk, G. Herting, M.A. Arenas, I. Odnevall Wallinder. Atmospheric corrosion of brass in outdoor applications. Patina evolution, metal release and aesthetic appearance at urban exposure conditions.Science of the Total Environment 412-413 (2011) 46–57.
A.Conde, M.A.Arenas, J. J de Damborenea. Electrodeposition of Zn-Ni coatings as Cd replacement for corrosion protection of High Strength Steel.Corrosion Science, 53 (2011) 1489-1497.
E. Matykina, A. Conde, J. de Damborenea, D. Martín y Marero, M. A. Arenas. Growth TiO2 Nanotubes on Ti-6Al-4V Alloy. Electrochimica Acta, 56 (2011) 9209-9218.
A. Conde, C. Muñoz-García, I.García, G. G. Fuentes, E. Almandoz, J.A. García, R.J. Rodriguez. Surface nano-wear, nano-hardness and corrosion resistance of electroplated Nickel surfaces after co-implantation of Cr and N ions. Surface and Coatings Technology, 205(2011) 4447-4452.
S. Carreras. L. Carreras, N. Martí, F. Montalà, R. Rodríguez, G. Fuentes, J. Yagüe, J. J. Damborenea, A. de Frutos, M.A. Arenas, A. Conde. Nuevos tratamientos de nitruración para la mejora de la Resistencia al desgaste y a la corrosión de los aceros inoxidables austeníticos. SURFAS Press, Nov. (2011) 46-50.
G.G. Fuentes, R. Rodriguez, A. Martínez, E. Almandoz, A. Conde, C. Muñoz. Tratamientos de implantación iónica para superficies de níquel en matrices de micro-estampación. SURFAS Press, Nov. (2011) 34-36.
2010
M.A. Arenas, A. Conde, J.J de Damborenea. Effect of acid-traces on hydrothermal sealing of TSA anodising layers. Electrochimica Acta, 55 (2010) 8704-8708.
A. de Frutos, M.A. Arenas, G.G. Fuentes, R. J. Rodríguez, R. Martínez, J.C. Avelar-Batista, J. J. de Damborenea. Tribocorrosion behaviour of duplex surface treated AISI 304 stainless steel. Surface Coatings and Technology, 204, (9-10) (2010) 1623-1630.
C. Pérez-Jorge Peremach, R. Pérez Tanoira, M.A.Arenas, E. Matykina, A.Conde, J. J de Damborenea, E. Gómez Barrena, J. Esteban. Bacterial adherence to anodized titanium alloy. Journal of Physiscs: Conference Series, 252 (2010) 1-8.