Saltar al contenido

Publicaciones

 

  • Garcés, J.M. Antoranz, P.Pérez, J.M. Badía, S.B. Dodd, S. Morris, P.Adeva. Microstructural characterisation and thermal stability of a metastable Mg-8.6 wt.% Zr alloy produced by physical vapour deposition. International Journal of Materials Research (2022) 880-885. DOI: https://doi.org/10.1515/ijmr-2003-0157
  • Ruiz-Menéndez, G., Andrade, C., Carro-Sevillano, G., Peña, C., Adeva, P., Medina, J., Fernández, R. Identification of the failure mode of corroding steel rebars in a viaduct in service through hardness measurements, Engineering, 13,(2022) 100331, DOI: https://doi.org/10.1016/j.rineng.2022.100331
  • Fekete K., Farkas G., Drozdenko D., Tolnai D, Stark A, Dobroň P.,Garcés G., Máthis K., The temperature effect on the plastic deformation of the Mg88Zn7Y5 alloy with LPSO phase studied by in-situ synchrotron radiation diffraction. Intermetallics 138 (2021) 107321, DOI: https://doi.org/1016/j.intermet.2021.107321
  • Adeva, P., Garcés, G., Medina, J., Pérez, P. New Processing Routes for Nanostructuration of Light Alloys, Encyclopedia of Materials: Metals and Alloys, 2021, pp. 224–233,DOI: 10.1016/B978-0-12-819726-4.00048-X
  • Garces G., Medina J., Chávez B., Perez P.,Barea R.,Stark A.,Schell N., Adeva P. Load Partitioning Between Mg17Al12 Precipitates and Mg Phase in the AZ91 Alloy Using In-Situ Synchrotron Radiation Diffraction Experiments, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (2021) 2732-2745, DOI: https://doi.org/1007/s11661-021-06258-w
  • Drozdenko D. Farkas G., Šimko P., Fekete K., Čapek J.,Garcés G.,Ma D., An K., Máthis K. Influence of volume fraction of long-period stacking ordered structure phase on the deformation processes during cyclic deformation of mg-y-zn alloys, Crystals 11 (2021) 1 – 14, DOI: https://doi.org/3390/cryst11010011
  • Medina, J., Garces, G., Pérez, P., Stark A., Schell, N., Adeva, P. High temperature mechanical behaviour of Mg–6Zn–1Y alloy with 1 wt.% calcium addition: Reinforcing effect due to I-(Mg3Zn6Y1) and Mg6Zn3Ca2 phases, Journal of Magnesium and Alloys, 2020, 8(4), pp. 1047–1060, DOI: https://doi.org/1016/j.jma.2020.08.007
  • Fernández, R., Bruno, G., Garcés, G., Nieto-Luis, H., González-Doncel, G. Fractional brownian motion of dislocations during creep deformation of metals, Materials Science and Engineering A (2020) 796, 140013, DOI: https://doi.org/10.1016/j.msea.2020.140013
  • Evsevleev, S., Sevostianov, I., Mishurova, T., Hofmann M., Garcés, G., Bruno, G., Explaining Deviatoric Residual Stresses in Aluminum Matrix Composites with Complex Microstructure,  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(6), pp. 3104–3113, DOI: https://doi.org/10.1007/s11661-020-05697-1
  • Garces, G., Barea, R., Stark, A., Schell, N. Anisotropic plastic behavior in an extruded long-period ordered structure Mg90Y6.5Ni3.5(at.%) alloy, Crystals, 2020, 10(4), 279, DOI: https://doi.org/3390/cryst10040279
  • Ubeda, C., Garces, G., Adeva, P., Frankel, G.S., Fajardo, S. The role of the beta-Mg17Al12 phase on the anomalous hydrogen evolution and anodic dissolution of AZ magnesium alloys, Corrosion Science, 2020, 165, 108384, DOI: https://doi.org/1016/j.corsci.2019.108384
  • Fernández, R., González-Doncel, G., Garcés, G., Bruno, G., Towards a comprehensive understanding of creep: Microstructural dependence of the pre-exponential term in Al, Materials Science and Engineering A, 2020, 776, 139036, DOI: https://doi.org/1016/j.msea.2020.139036
  • Fekete, K.H., Drozdenko, D., Čapek, J., Máthis K., Stark, A.,Garcés, G., Dobroň, P. Hot deformation of Mg-Y-Zn alloy with a low content of the LPSO phase studied by in-situ synchrotron radiation diffraction, Journal of Magnesium and Alloys, 2020, 8(1), pp. 199–209, DOI: https://doi.org/1016/j.jma.2019.11.009
  • Mohedano, M., Pérez, P., Matykina, E., Pillado, B.,Garcés, G., Arrabal, R. PEO coating with Ce-sealing for corrosion protection of LPSO Mg–Y–Zn alloy, Surface and Coatings Technology, 2020, 383, 125253, DOI: https://doi.org/1016/j.surfcoat.2019.125253
  • Garcés, G., Orozco-Caballero, A., Quinta da Fonseca, J., Pérez, P., Medina, J., Stark, A., Schell, N., Adeva, P. Initial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiation, DOI: https://doi.org/1016/j.msea.2019.138716
  • Chávez, B.W., Garcés, G., Pérez, P., Barea, R., Adeva, P. , Dynamic strain aging (DSA) in solid solubilized Mg-Gd alloys under compression at intermediate temperatures, Revista de Metalurgia, 2020, 56(3), e175, DOI: https://doi.org/3989/REVMETALM.175
  • Cabeza, S., Zubiaur, P.P., Garcés, G., Andrade, C., Adeva, P., Corrosion behaviour of mg98.5nd1zn0.5 (at. %) alloy in phosphate buffered saline solution, Metals, 2020, 10(1), 148, DOI: https://doi.org/3390/met10010148
  • Fekete K., Farkas G., Drozdenko D., Tolnai D, Stark A, Dobroň P.,Garcés G., Máthis K., The temperature effect on the plastic deformation of the Mg88Zn7Y5 alloy with LPSO phase studied by in-situ synchrotron radiation diffraction. Intermetallics 138 (2021) 107321, DOI: https://doi.org/1016/j.intermet.2021.107321
  • Evsevleev, S., Cabeza, S., Mishurova, T., Garcés G., Boin M. ,Hofmann, M., Bruno, G., Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one- and two-ceramic reinforcements. Part II: effect of reinforcement orientation, Journal of Materials Science, 2020, 55(3), pp. 1049–1068, DOI: https://doi.org/ 10.1007/s10853-019-04069-4
  • Gerardo Garcés, Máthis, K., Barea, R.,  Medina, J., Pérez, P., Stark, A., Schell, N., Adeva, P. Effect of precipitation in the compressive behavior of high strength Mg-Gd-Y-Zn extruded alloy. 2019. Materials Science and Engineering A, 768. Elsevier. ISSN:0921-5093, DOI: https://doi.org/10.1016/j.msea.2019.138452
  • Monge, M.A., Adeva, P., Muñoz, A., Pérez, P. Oxidation behaviour of tungsten with vanadium additions (2019) Fusion Engineering and Design, 146, pp. 783-786, DOI: 10.1016/j.fusengdes.2019.01.079
  • Gerardo Garces; P. Pérez; R. Barea; J. Medina; P. Adeva.Increase in the Mechanical Strength of Mg-8Gd-3Y-1Zn Alloy Containing Long-Period Stacking Ordered Phases Using Equal Channel Angular Pressing. Metals. ISSN 2075-4701,DOI: http://dx.doi.org/10.3390/met9020221
  • Ubeda, C; Garcés, G; Adeva, P; LLorente, I; Frankel, G.S; Fajardo, S. The role of the beta-Mg17Al12 phase on the anomalous hydrogen evolution and anodic dissolution of AZ magnesium alloys. Corrosion Science. Elsevier, 2019. ISSN 0010-938X , DOI: https://doi.org/10.1016/j.corsci.2019.108384
  • Pérez, P., Garces, G., Frutos-Myro, E., Antoranz, J.M., Tsipas, S., Adeva, P. Design and characterization of three light-weight multi-principal-element alloys potentially candidates as high-entropy alloys.Revista de Metalurgia. 55 - 3, CSIC Consejo Superior de Investigaciones Científicas, 2019. ISSN 0034-8570.
  • Garcés, G., Orozco-Caballero, A, Quinta da Fonseca, J., Pérez, P., Medina. J., Stark, A., Adeva, P., Schell, N.Initial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiation. Materials Science and Engineering A. in press, Elsevier, 2019. ISSN 0921-5093
    DOI:https://doi.org/10.1016/j.msea.2019.138716
  • Monge, M.A.; Adeva, P.; Muñoz, A.; Pérez, P. Oxidation behaviour of tungsten with vanadium additions. Fusion Engineering and Design. Elsevier, 2019. ISSN 0920-3796, DOI:https://doi.org/10.1016/j.fusengdes.2019.01.079
  • Garcés G; et al. 2018. Evolución microestructural y envejecimiento dinámico por deformación en la aleación Mg-6%Gd- 1%Zn durante ensayos a tracción y compresión a temperaturas intermedias. Revista de Metalurgia. CSIC. 54-3, pp.124. http://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1438
  • Garcés G; et al. 2018. Combination of in-situ diffraction experiments and acoustic emission testing to understand the compression behavior of Mg-Y-Zn alloys containing LPSO phase under different loading conditions. International journal of plasticity , 2018, Vol.106, p.107-128. Elservier. 106, pp.107-128. DOI: 10.1016/j.ijplas.2018.03.004
  • Garces, G.; et al. 2018. Influence of quasicrystal I-phase on twinning of extruded Mg-Zn-Y alloys under compression. Acta Materialia. Elsevier. 151, pp.271-281. DOI:10.1016/j.actamat.2018.03.060
  • J. Medina; et al. 2018. High-strength Mg-6Zn-1Y-1Ca (wt%) alloy containing quasicrystalline I-phase processed by a powder metallurgy route. Materials Science and Engineering A Volume 715, 7 February 2018, Pages 92-100. 715-7, pp.92-100. DOI: 10.1016/j.msea.2017.12.111
  • Garces, G.; et al. 2018. Maintaining high strength in Mg-LPSO alloys with low yttrium content using severe plastic deformation. MATERIALS. MDPI. 11-5, pp.733. DOI: 10.3390/ma11050733
  • J. Medina; et al. 2017. Effects of calcium, manganese and cerium-rich mischmetal additions on the mechanical properties of extruded Mg-Zn-Y alloy reinforced by quasicrystalline I-phase. Materials Characterization. Elsevier. 129, pp.195-206. DOI: 10.1016/j.matchar.2017.04.033
  • Garces, G; et al. 2017. Evolution of twinning in extruded AZ31 alloy with bimodal grain structure Materials Characterization. 126, pp.116-124. 10.1016/j.matchar.2017.02.017
  • Garces, G.; et al. 2017. Effect of Extrusion Temperature on the Plastic Deformation of an Mg-Y-Zn Alloy Containing LPSO Phase Using In Situ Neutron Diffraction. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 48 (11), pp. 5332-5343. 48-11, pp.5532-5343.DOI: 10.1007/s11661-017-4284-6
  • Delgado, M.C.; et al. 2017. Influence of aluminium enrichment in the near-surface region of commercial twin-roll cast AZ31 alloys on their corrosion behaviour. Corrosion Science. 123, pp.182-196. DOI: 10.1016/j.corsci.2017.04.027
  • Zubiaur, P.P.,; et al. 2017. Influence of second phases on the superplasticity of Mg-Tm-Y-CeMM alloys containing LPSO-phases. Materials Science Forum Volume 879, 2017, Pages 1477-1482. 879, pp.1477-1482. DOI: 10.4028/www.scientific.net/MSF.879.1477
  • Garcés, G. et al. 2016. Nano-precipitation Strengthened G91 by Thermo-mechanical Treatment Optimization. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Springer. 47-11, pp.5344. DOI: 10.1007/s11661-016-3596-2
  • J.Medina; et al. 2016. Microstructural changes in an extruded Mg-Zn-Y alloy reinforced by quasicrystalline I-phase by small additions of calcium, manganese and cerium-rich mischmetal. Materials Characterization. Elsevier. 118, pp.186-198. DOI: 10.1016/j.matchar.2016.05.019
  • Garces, G.; et al. 2016. Effect of reinforcing shape on twinning in extruded magnesium matrix composites. Materials Science and Engineering A. Elsevier. 666, pp.48-53.DOI: 10.1016/j.msea.2016.04.028
  • D.De La Fuente D; et al. 2016. Corrosion mechanisms of mild steel in chloride-rich atmospheres. Materials and Corrosion Llorente I.,García-Delgado A., Jiménez J.A., Adeva P., Morcillo M.,. WILEY-VCH. 67-3, pp.227-238.DOI: 10.1002/maco.201508488
  • P. Pérez; et al. 2016. Influence of long period stacking ordered phase arrangements on the corrosion behaviour of extruded Mg97Y2Zn1 alloy. Corrosion Science • P. Pérez, S. Cabeza, G. Garcés, P. Adeva. DOI:10.1016/j.corsci.2016.02.024
  • Garces, G. et al. 2016. Formation of an 18R long-period stacking ordered structure in rapidly solidified Mg88Y8Zn4 alloy. Materials Characterization. 118, pp.514-518. DOI: 10.1016/j.matchar.2016.06.032
  • G.Garces; et al. 2015. Reverse tension/compression asymmetry of a Mg–Y–Zn alloys containing LPSO phases. Materials Science and Engineering: A, Pages 287-293. W. Gan, P. Adeva. 647.-28, pp.287-293. DOI:10.1016/j.msea.2015.09.003
  • Garces, G. et al. 2015. An examination of strain ageing in a Mg–Y–Zn alloy containing Gd. Journal of Materials Science. Kluwer Academic Publishers. 50-17. DOI: 10.1007/s10853-015-9124-8
  • G. Garces et al. 2015. Plasticity analysis by synchrotron radiation in a Mg97Y2Zn1 alloy with bimodal grain structure and containing LPSO phase. Acta Materialia. 94,pp.78-86. DOI: 10.1016/j.actamat.2015.04.048
  • Garces, G.; et al. 2015. Properties of WZ21 (%wt) alloy processed by a powder metallurgy route. Journal of the Mechanical Behavior of Biomedical Materials. 46, pp. 115-126, pp.115-126. DOI: 10.1016/j.jmbbm.2015.02.022
  • Garcés, G.; et al. 2014. Influence of rare-earth addition on the long-period stacking ordered phase in cast Mg-Y-Zn alloys. Journal of Materials Science. 49-7, pp.2714-2722.DOI:10.1007/s10853-013-7967-4
  • Cabeza, S.; et al. 2014. Microstructure and mechanical behavior of powder metallurgy Mg 98.5Gd1Zn0.5 alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45-8, pp.3222-3231. DOI:10.1007/s11661-013-2041-z
  • Garces, G.; et al. 2014. Optimization of strength by microstructural refinement of MgY2Zn1 alloy during extrusion and ECAP processing. Materials Science and Engineering A. 614, pp.96-105. DOI:10.1016/j.msea.2014.07.012